|
Click
Photos for more pictures and information |
|
 |
Novak 29'
By Charleston Wooden Boatworks
Rhodes Yacht Design |
|
 |
Letseell
Karl Stambaugh
Design
34' Redwing tug boat version trawler yacht built for
Eric and Sara Nelson of St. Francesville, LA
See Additional Photos Here |
|
 |
First
Time |
|
 |
Helen
Annette |
|
 |
Spirit of South Carolina
www.scmaritime.org |
|
 |
Marybeth's Runabout (Baby Girl)
Built by Chris Mullen and Friends |
|
 |
Church
Skiff
Built by Jack Budak of Sea Island Boat
Builders
Designed by Mark Bayne - The Godfather
|
|
 |
Kurt Hughes Design
55' charter catamaran built for Peter Cromwell
of
Buffalo, NY
|
|
 |
15' Bateau
Designed by:
Mark Bayne and built by Mark and
Johnson Bayne |
|
 |
32' Sea Runner Day Charter
Catamaran
Hardtop Version
Designer: John Marples
Owner: William Bonbright, Rincon Puerto Rico, of
Katarina Sail Charters
www.sailrinconpuertorico.com
Click here for Specs |
|
 |
36' Yawl
Designed by : Bruce Kirby
Owner : Martin Solomon of Nassau, Bahamas The boat will be used for day
sailing and short overnight trips in the Bahamas, it will have a keel-center
board for shallow draft. |
|
 |
Cypress Gardens Tour Boat
One of two new tour boats,
designed to carry 10 passengers plus 1 crew who paddles
the boat form the rear seat.
|
|
|
"Lena"
Designed
by: Bruce Kirby
Owner:
David Murphy Mandeville, LA.
Construction
= Marine Plywood over Mahagony and D-Fir, sheathed in
epoxy with 12oz biaxle cloth with 6oz mat backing and
Awlgrip finish. The 56 hp Yanmar pushes her to 8 + knots
with the centerboard up - She sails even faster!!! Charleston,
SC to Miami FL in 64 hours!
|
|
 |
"Sirius"
36' Day Charter Catamaran
Designer: Kurt Hughes
Owner: Kimber and Ann Rosswork of Lucky Dog Catamaran
Co., St. Michaels, MD
www.luckydogcatamarancompany.com |
|
 |
Islander Repair |
|
|
'Mistress'
Sea Island 56' Sportfishing
Boat
Owner: Steve Gyland, Jupiter FL
|
|
 |
'Palmetto Breeze'
55' Day Charter Catamaran
Designer: Kurt Hughes
Owner: John & Carole Borden
Site:
www.aqua-safaris.com
|
|
|
'Dixie Rig'
Sea Island 58'
Sportfisher
Owner: Steve Phillips
Site: www.dixierig.com
|
|
 |
Shrimp Boat For Children's Museum
Children's Museum |
|
|
'Mistress'
(formerly 'First Time')
Sea Island 45' "Express" Sportfishing Boat
Owner: Joe Guggino
The boat is kept in Key Largo, Florida
|
|
|
'Bull Marlin'
30' Lobster Boat
Shem Creek Bar and Grill
Designed by: Nelson Zimmer
Built for: John Avinger
Construction: 3/4" mahogany strip planking, covered
with 4mm veneer, and 10 oz. fiberglass cloth in epoxy.
|
|
|
'Anthony'
36' LOD Schooner
Designed by: William Hand with
modifications by Jay Benford
Built for: Bill Jones
Construction: 1 1/4" juniper strip planking with
2 layers of 1/8" fir veneer.
Covered with 2 layers of 10oz. cloth in epoxy.
|
|
|
'Juncanewt'
57' Sportfisher, Carolina Style
Owner:
Dr. John Cagel
|
|
|
Windward 24'
Designed by: Karl Stambaugh of Windward
Designs
Built for: David Murphy, Mandeville, LA
|
|
|
20' Abaco
Skiff
Owned by Mark Bryan
Designed by Doug Hylan
|
|
|
'Sibling'
32' Searunner Catamaran-"Hardtop"
version
Designed by: John Marples
Click here for Specs
Construction Method: The hull consists of four layers
of 3mm exterior grade Okume plywood, cold-molded with
epoxy and vacuum bagged over a male mold using the Brown/Marples
Constant Camber Method. All framing lumber is Douglas
Fir or like equivalent and all decking is 12mm and 18mm
Okume plywood. The hull and deck are completely covered
with 6 oz. fiberglass cloth embedded in epoxy and all
exposed wood is coated with epoxy.
|
|
|
'Island Time'
50' Searunner-"Hardtop" version
USCG Certified for 49 Passengers
Designed by: John Marples
Click here for Specs
Construction: Hull consists of five layers of 4mm Okume
marine grade plywood, cold-molded and vacuum-bagged over
a Constant Camber male mold with stringers, keel, and
associated framework of laminated Douglas Fir. Decks and
cockpit constructed of 12mm and 18mm Okume plywood. All
exterior surfaces have 20 oz. fiberglass/epoxy skin, and
all interior surfaces are coated with epoxy.
|
|
|
'Vital'
50' Searunner-"Hardtop" version
USCG Certified for 49 Passengers
Designed by: John Marples
Click here for Specs
Construction: Hull consists of five layers of 4mm Okume
marine grade plywood, cold-molded and vacuum-bagged over
a Constant Camber male mold with stringers, keel, and
associated framework of laminated Douglas Fir. Decks and
cockpit constructed of 12mm and 18mm Okume plywood. All
exterior surfaces have 20 oz. fiberglass/epoxy skin, and
all interior surfaces are coated with epoxy.
|
|
 |
50' Sea Island Express
Designed by:
Applied Concepts
Unleashed Inc
of Stuart Florida
Proposed power: 1000 HP Catepillars |
